Before we start off writing the directions on how to hook up an HD radio to your car, we must know the meaning of the HD radio. It is a service that delivers digital audio by the radio stations especially FM radio. Generally the HD radio has two parts in the installation. One is its head unit. This head unit is generally fixed in the car by the factory and has all the necessary controls to control the audio. The second part is the radio. This is connected to head unit for controls. This HD radio is not available with all factory cars and is optional. The interested people have to buy it separately. There are other types of radios like satellite radio. This radio need to be fees for use. Unlike this, the HD radio is does not require fee.
This article will list all the things that are required to install a HD radio and also the proper procedure to install the same to your car. Installing a HD radio to your car is simple thing to do and you need not search for an engineer or a mechanic to do this work. By doing this work on your own you can save your time and your money. The things that are required are the radio and an electrical tape. Make sure you have an electrical insulation tape of good quality to be in safer side.
After the things are ready, the first step to do is to disconnect the battery. This can be done by removing the negative end of the batter with the help of wrench or any other suitable tool. Then, an antenna jack that is present on HD radio is connected with the antenna of the car. This need not be done with the antenna input of the head unit but with the radio directly.
Next, take the black colored wire from the lead set consisting of black as well as yellow wires. This black wire is then connected to the chassis of the car. A clean surface is chosen with no paint on it. There are some pieces that already come with wiring set. This can also be used. Then, yellow lead is connected to the twelve volt supply which is constant. This yellow lead had a fuse inline.
The cable is connected to the CD player in your car using the blue coloured connector. This is called as IP BUS cable. The other end is connected to the head unit in the car’s dash board. HD radio’s connector is black in colour.
A cable called the IP – BUS cable is connected with the cable. This is a blue converter. The other end of this is connected to the other end of the head unit. If there is a multi player then one can even fix it to that. The black color in the HD radio indicates the connector’s presence.
All the white and blue wires that are coming out off it should be properly connected and it must be well secured. The documentation of the car can be cross checked with this one. Then all the wiring are sealed well with electrical tape. Later as the last step the battery of the car can be re installed and a proper test can be carried out with the radio that is newly installed.
Hence one should know how to hook up an HD radio to your car?
Looking to find the best deal on Radiohalterung, then visit www.powernetshop.at to find the best advice on radio dash kits for you.