RSS
 

Posts Tagged ‘diy’

What Is A Rainwater Tank?

28 Jun

It seems as though sometimes we get way too much rain and then all of a sudden it stops coming down and we do not have enough. A solution to this inequity is the use of Rain Water Tanks Adelaide. With these tanks, one can collect rain and stored it for later use.

In the UK, these tanks are called water butts and in North America they are also referred to as rain barrels. Whatever you choose to call them, they are great for catching water that can be used later. Most of these tanks are above ground but in-ground ones can also be used, especially in typically arid climates when dry conditions are a given and water will be in short supply.

Types of tanks may be concrete, plastic or galvanized steel as well as stainless steel and fiberglass which are chemical resistant and rust proof. They are found often on the tops of roofs as well as patios, driveways and other areas with waterproof surfaces.

The uses of the collected water vary. Most commonly it is used to irrigate crops. It is also used for everyday household activities like washing the car, flushing the toilet, using the washing machine and watering small gardens and lawns. It may also be used as drinking water. If so, extra attention must be given to the water and the tanks to be certain the water is safe for consumption.

A well equipped tank will make it easier to have a drinkable, uncontaminated water supply. Dirt and debris as well as insects and bird droppings can be kept out with a screen cover. A tank that is opaque will disallow the penetration of sunlight and thus minimize algae and bacteria growth. A plastic lining inside the tank aids in leak prevention and keeps water quality higher.

It is also imperative that, even if these steps are taken, any water that is drunk is properly filtered. Even thought rain water is pure, it may become contaminated after collection. And while rain does not contain chlorine, air pollutants can affect the water after it is gathered. It is advised not to drink water from rainwater tanks unless there are no other sources of drinkable water.

The use of tanks for rain collection can impact the environment, either positively or negatively. Wide use of these tanks will lessen the amount of water that reaches the ground in certain areas and limit the amount that reaches streams. Depending on where the use of tanks is taking place, this may prevent erosion, sedimentation and pollution. On the other hand, it may cause stagnated ponds and dried up rivers. If the collected rain is used within the same area and put back into the ground, it can actually have the effect of stabilizing ponds and rivers.

This rainwater tank info article was brought to you by Water Tanks Queensland, Water Tanks

 
Comments Off

Posted in Business

 

Using Teflon Tape to do Plumbing Repairs

05 May

There are certain tools that can be found in every plumber’s repair kit. Teflon tape, also referred to as plumber’s tape, is a common tool used by plumbers and homeowners to stop pipe connections from leaking. This tape is stretchy to maximize tight connections, thin, white, and is effective at stopping leaks because it does not gunk up in the plumbing connection threads.

You can buy Teflon tape in the form of a roll at plumbing supply stores, hardware stores, and home supply stores. It is an inexpensive tape that is much like a ribbon and is long lasting. It is used not only used for water leaks, but also to stop gas leaks.

It is quite easy to apply Teflon tape to a pipe fitting connection. You just pull the required amount of tape from the roll and wrap it a minimum of three times around the end of the pipe fitting. You must apply the tape to avoid wrinkles, bubbles, or creases in the tape which can cause bubbles. It should also be wrapped securely to ensure it is completely leak and air tight. As well, when wrapping and handling the tape, your hands should be clean of any dirt, debris, and grease to prevent tape degradation. Once the tape is securely wrapped around the fitting, it is important to press firmly to ensure a complete firm and secure fit.

Once you have the tape firm and secure around the pipe connection threads, you will then place one end of the pipe fitting into the other end. It is the male end into the female end. You will then tighten the two connections. It must be tight enough so that it is completely secure. If you have to take them apart to adjust the fitting, it is easy to do as the Teflon tape acts as a lubricant.

In most cases, Teflon tape is used to wrap around threads of pipe fittings when there is low water pressure and around pipes that transport oil into the home heating system. It is also used to wrap around gas pipe fittings but will be wrapped more times to make it thicker. Teflon tape should only be used to wrap around threads and not the actual pipe because just wrapping around the pipe will not stop the leak as it is less secure and tight. Do not use white Teflon tape on iron pipe gas fittings as it will degrade and cause leaks. Yellow Teflon tape is used for iron pipe fittings because of their double density. Green Teflon tape is used on copper which is used with pipe threads or bolts in mechanical devices. If you are unsure about the leak and whether applying the tape will fix the problem, you should enlist the services of a qualified plumber, especially if you have a gas leak which can be dangerous. Professional plumbers are trained and certified to locate the problem and provide a quality repair that is quick and efficient.

Looking for a local plumber to fix your plumbing problems? Then contact the plumbing experts at Mr.Rooter, offering plumber Newmarket and plumber Markham, and plumbing services Canada Wide. Visit mrrooter.ca to find plumbing services in your city.

 
Comments Off

Posted in Business

 

Why Use A Joiner For Sash Window Replacement

06 Mar

Looking for a craftsman to help out with your sash window replacement project, then consider using a joiner who specializes in furniture building and cabinetry. Architectural timbering is another name for this type of carpentry. It is an art form that utilizes the craft of various methods of joining wood and is considered a very old craft style.

Sometimes with an older home a lot of the character comes from the size and shape of the windows and with age and time they can develop dry rot and require maintenance that only a joiner or someone who has a specialty in cabinet making can assist with. Recreating these works of art will surely maintain the integrity and value of your home for years to come.

Just because you might feel like your windows are beyond repair and there is no alternative but to replace them with new ones you can rest assured that there is another way. A master joiner can restore your windows to their original look by using modern products and old world joinery.

A master is sometimes needed if your home if from a period of heavily decorated windows. And if you find there are pieces missing a decorative arts carpenter could be the one for you. These masters can recreate details that were long lost from dry rot or just age.

Knowing that a company specializes in replacing sash windows is the best choice as you can count on the fact that they will be thorough, efficient and cost you less money as they will know exactly what needs to be done. Your windows will look just like the originals only better with the use of modern products.

Ask for references from your friends who have used construction companies or architects that they have liked, they will often know of master craftsmen who have experience in sash window replacement if they have a cabinetry background.

Take a look at custom cabinet shops for an artisan carpenter as they will often be trained in the craft of sash window building and are very knowledgeable about different styles of windows.

Keep in mind that this type of project will entail the removal of old lead paint if your house is of an older vintage. A professional will utilize a two-step process that is dust free and will eliminate health hazards.

In lieu of replacing your beautiful old windows for mass manufactured replacements that lack the charm and character of the original issue, hire an old world craftsman to build them for you to retain the beauty of your home and increase it's resale value.

In order to find a window repair in London, you need to find a business that you can trust. Sash window repairs London can help. You can see their work and much more on their web page found online, you will also see sash window renovation at its best.

 
Comments Off

Posted in Uncategorized