It is by using natural resources such as tidal or wind energy – collectively known as ‘Green Energy’ – that we could meet our daily energy needs. They’re all considered naturally able to replenish – and thereby ‘Green’. It is easy to think that we may be travelling back in time when we think of items such as wind power and windmills. Generally, this is the result of using up to date ideas, specifically those that are planet friendly and eco-efficient.
The home environment, for example, encompasses a range of energy ideas – including Solar Thermal and Solar Water Heating solutions. Equally there is electricity that is generated through roof-installed panels. Biomass Energy is the next phase, and this involves Fuel, Pellets, Stoves and Boilers burning Wood. What shouldn’t be forgotten is the heat stored in the ground from the Sun – often simply referred to as Ground Source Heat Pumps. Not all ‘Green Energy’ is new – by considering Wind Power and Hydropower we are looking at some of the oldest forms of energy production.
Thermal Energy Systems: By using different technologies, Solar Energy is effectively made up of two types of solar panels. Making hot water from solar energy is the first stage – and is known as Solar Water Heating Collection. Then we have the work of the Photovoltaic Heat Collectors, often called Solar Electrical Panels – which transform solar radiation into electricity. Across the board, Solar Panels should be mounted on a south facing roof, at an angle of 30 degrees away from horizontal – and to some extent away from blocking trees, surrounding buildings and chimneys.
Within this discipline, Solar Water Power is often regarded as the most popular form of Solar Energy within the UK. These systems are very efficient – and can deliver 50 percent of a household’s hot water requirement annually. The typical cost for installation ranges from 500-1500 pounds for a DIY system, all the way through to 2-5k for a professional fit.
Biomass Energy Systems – This is a general term for all forms of plant and animal material e.g. wood, straw, poultry litter and ‘energy crops’. It is by using these materials in new ways to create energy that makes it so exciting. It is a useful point to make that the UK is one of the major producers of Biomass fuels within Europe. It is the minimal C02 produced, alongside the actual energy production, that makes this attractive to the markets. Having a tree planted in place of another (that is felled for energy production) helps overall.
A process called Short Rotation Coppice (SRC), utilising trees such as Willow and Poplar, is used to meet the demands of such ‘Energy Crops’. Dry matter is also very sought after – and perennial grasses are a good source of this. Within this process also sits the lesser known Agricultural and Municipal Wastes. Agricultural Waste is commonly formed as a by-product of traditional agricultural work. Of equal importance is Municipal Waste, which comes from recycyled wood and food.
Geo-Thermal Energy: Basically this is the warming of the Earth from the Sun – and is often used in the manufacture of warm water and electricity. By using the ground source temperature of approximately 12 degrees, we can either heat or cool buildings within the UK. With four units replaced for every one unit of energy used, these heat pumps are very effective. Utilising the energy generated from wind turbines and solar electrical panels alongside heat source pumps, can make them alomst 100 percent renewable.
Wind Energy: The use of wind as a source of energy has been going on for thousands of years, especially in milling grain and pumping water. However, in more recent times there’s been the option to recover the energy for its own sake – and deliver this either to a home unit or to the local power grid. The UK is considered as one of the best sources of wind generation within Europe. It is interesting to note that whilst we can produce 10 percent of our entire power requirement from wind power, at present we only produce 1 percent. Instead of producing electricity at a rate of 2-10p per kWh, we could be generating at 2p per kWh. From this, the estimation of the cost recovery period is around 6-9 months overall.
Within the UK, Hydropower suits the energy generation model. Just like a thousand years ago, we are utilising the energy from water. Interestingly enough, this type of energy production meets around 2 percent of the UK electrical total demand.
By using a turbine, a Hydropower system can transfer the kinetic energy of moving water into another form. By using a dam or a natural river drop, these turbines do not require water storage. ‘Micro-Hydro’ however, uses the dam and sluice systems that have been made redundant by the larger national distributions. Although a lesser known form of electricity output, this process could supply 200mW of UK demand. A micro-hydro system like this would be expected to cost between 200 and 3,000 pounds per kW of the energy.
‘Green Energy’ is growing – mainly due to the demands of the Western World. That said, the UK is well placed – especially in the domestic sector – to take full advantage of the items above.
Once again, it is the Electrician and Plumbing trades that are set to capitalise on the domestic installation process. Grants and financial aid is also set to increase within the EEC and the UK – as ‘Green Energy’ gets ever higher status. As a new industry, there are a range of new certificates to gain. To cover both ends, you could consider electrical or plumbing training along with green systems.
(C) 2009 – S. Edwards. Pop over to Solar Energy Training or Solar Energy Courses.